Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2-Inch Cordless Hammer Drill/Driver Kit Review

Average Reviews:

(More customer reviews)I've used Milwaukee's 18v drill for years (I own two of them) and they've never failed me. By far, the best cordless drill available... until now. When Milwaukee came out with their V28 line, I was intrigued, but I didn't need a new drill. Besides, the 18v drill I had worked fine, I didn't think it was necessary to upgrade (especially for the price). When it came time to buying a hammer drill, I looked again at the V28 hammer-drill and decided to buy one, figuring it would at least allow me to combine two tools into one and save the room in my car. I ended up getting a LOT more then I expected.

First, the belt clip is amazing. I didn't think twice about it when I read the drill's description, since I have a holster that works fine. The holster's now in the garbage as the belt clip is absolutely ingenious. Now I can easy attach the drill to my belt without looking and it's fully secure. With one hand I can push down on the latch and detach the drill for use... a marvelous idea. Best thing about it is I can also use it with my V28 flashlight when I need to.

Another thing I really like about this new drill is the bit holder... I always liked the idea of DeWalt's drill's holding the single bits, but Milwaukee provides a place for two. However, the only downside to this is if you use the drill in the hammer-drill setting, the bits tend to slide out after prolonged use.

Then there's the power... one of my first uses was drilling a 1" hole at an angle through two old 1x10 joists and a 2x4 in order to run a wire. I've done it several times with my old 18v, but I always end up having to reverse back a bit then start again to get a bit of momentum. If I can, I normally leave the job up to a corded drill to make things nice a quick. Not anymore... the V28 ripped right through the wood without the slightest problem. The power difference between the 18v and the V28 is shocking... you'd think you were using a corded drill.

The hammer-drill function was another big plus for me... I used this drill side by side with another corded Milwaukee hammer drill to drill numerous holes into a concrete foundation. The cordless worked just as well as the corded... no difference at all, except I wasn't lugging around a cord.

Lastly, there's the longevity of the charges... usually I'll go through at least one full battery and charge it on the site. Again, not anymore. I rarely need to use the second battery during a single day.

If I could, I'd give it six-stars. This thing is just incredible.

Click Here to see more reviews about: Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2 Inch Cordless Hammer Drill/Driver Kit

Product Description:
Sporting the longest running 28-volt hammer drill on the market, Milwaukee's V28 lithium-ion cordless kit is always charged up for the beefiest drilling and driving applications. The tool switches easily between drill, drive, and hammer modes for less downtime and smoother transitions between tasks. This ½-inch hammer drill cranks out a whopping 600 inch-pounds of torque for drilling large holes and driving heavy bolts for deck support, playground equipment, and post-and-beam construction. The two variable speeds do it fast, too, spinning along at 0-600 or 0-1800 rpm's for more productivity.
Powering the V28 is Milwaukee's revolutionary 28-Volt Lithium-Ion battery pack. The 28-volt battery pack weighs less than an 18-volt NiCad pack yet delivers twice the runtime. And, a patented battery design lets you insert the battery in the reverse position for optimal balance when working overhead or in hard-to-reach areas.
The V28 hammer-drill comes standard with a ½-inch all-metal, single-sleeve, ratcheting chuck with carbide jaws that keep bits from falling out or slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. For easy transport and access, Milwaukee's patented Clip-Lok system attaches the tool securely to the operator's belt or tool bag and easily releases with one hand-a boon for ladder work where there's is nowhere safe to rest the tool. Milwaukee cover's this kit with a 5-year warranty. --Brian Olson
What's in the Box
28-volt hammer drill, two 28-volt batteries, 1-hour charger, carrying case, Clip-Lok System, side handle and No. 2 Phillips bit

Get 24% OFF

Want to read more honest consumer review about Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2 Inch Cordless Hammer Drill/Driver Kit now ?

Husqvarna 455 Rancher 20-Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw Review

Average Reviews:

(More customer reviews)I just picked up a 455 Rancher about a month ago (today is 4 May, 2006). This is a great saw. I had been using for more than 20 years, and still use to some degree a Stihl 028; another excellent saw.

There are some pros and cons to this saw as with all things.

Here's what I like. It's easy to operate and maintain. Accessibility of the under-cowel components such as the air filter, spark plug, and clutch housing is a no-brainer. It starts easy. In fact, you really don't need the pressure valve. It "pops" after a few short and fast pulls. Remember, once the saw "pops" with the choke, un-choke it and pull it again. You do not need to warm a two stroke with the choke on like you would a 4 stroke engine. Attempting to warm with the choke is the biggest cause of two stroke engine flooding.

Here's what I do not like. The low/hi mixture settings are limited by EPA regulations; a complete and total joke. If you remove the controls to optimize your settings, the warranty is void. But, I think it's better to do that than cook engine from lean settings. There aren't enough chainsaws running in any given period of the day to justify this regulation. So if you are a casual user, really pay attention to the break in procedures. Since the saws run lean, you need to make sure to break them in with extra care. If you use them much more frequently, remove the EPA limiters and richen out the hi/low mix, otherwise you will cook your engine.

Overall this is a great saw. The chisel chains do well for heavier applications. Be careful of kickback with these style chains. You can get low-kick back chains from any dealer. It's all a matter of personal preference.

I have outfitted my saw with an Oregon 20" Bar, chain, and rim sprocket.Once again this is a personal preference issue. The power head of the 455 is plenty and the applications many. If you are a causal user of this saw, talk with the folks at the saw shops for tips and ideas. They are a repository of knowledge and can help you make informed decisions about your saw.

-Washington State

Click Here to see more reviews about: Husqvarna 455 Rancher 20 Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw

Product Description:
Husqvarna, 455 Rancher, 20" Gas-Powered Chainsaw, 3.4CUIN (56CC), 2 Cycle Engine, Dual Action Chain Brake & LowVib Features For Added Safety & Comfort, Air Injection System, SmartStart Provides Easy Starting, Lightweight At Only 12 LB, Pro/Commercial Grade Quality, 2 Year Warranty Consumer Use, 90 Day Warranty Pro/Commercial Use.

Want to read more honest consumer review about Husqvarna 455 Rancher 20 Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw now ?

Troy-Bilt TB10CS 17-Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer Review

Average Reviews:

(More customer reviews)I purchased this trimmer to replace my electric trimmer that was falling apart.The directions are straight-forward, and assembly was simple.Starting the trimmer for the first time took several tries, but eventually fired right up.
Moving from an electric trimmer to a gas trimmer is quite a change.The Troy-Bilt has dual-trimmer ends, and rotates much faster.It weighs quite a bit more than the electric, naturally, which is really the only downfall, outside of the edge guide.The edge guide is a bit awkward, since it is a rotating wheel.It is a bit bulky and makes it hard to judge the true length of the strings.
Overall, especially for the price, you can't beat this trimmer.I would recommend it to anyone with a moderate sized yard.

Click Here to see more reviews about: Troy-Bilt TB10CS 17 Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer

Product Description:
The Troy-Bilt 31 cc 2-cycle gas trimmer with 17-inch cutting swath and edge guide features convenient EZ-Start choke technology, which allows the user to simply flip the choke, prime the engine, and then give a slow, smooth, easy pull for a guaranteed start. The EZ-Start technology allows the trimmer's engine to engage with 55-percent less effort than most gas models. With its rugged 31 cc engine, the trimmer provides plenty of brawn to power through the most ragged, overgrown growth. The trimmer's professional-style curved-shaft design gives easy access underneath low-growing shrubs. The trimmer cuts in a 17-inch radius and features heavy-duty, 0.080-inch dual lines with convenient bump-head line release.
When it's time to replace the line, the line replacement system is exceptionally easy to load and rewind, all without removing the spool or taking it apart. The entire trimmer feels exceptionally balanced and comfortable in the hand, and the ergonomic soft-grip D-shaped handle easily adjusts for both right and left-handed users. The trimmer comes with all the necessary oil for immediate operation, and is covered by a 2-year limited warranty.

Get 2% OFF

Want to read more honest consumer review about Troy-Bilt TB10CS 17 Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer now ?

Yard Machines 3100M 17-Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer Review

Average Reviews:

(More customer reviews)For the money, the trimmer is a good value. It was a little rough at start-up for the first time, but the more it is used, the more smoothly it runs. I bought mine for about $53.00 and got free shipping. It is a refurbished trimmer.

Click Here to see more reviews about: Yard Machines 3100M 17 Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer

Product Description:
The Yard Machines 31cc 2-cycle non-clutch curve shaft gas trimmer includes a dual line bump head, 2-cycle gas engine with chrome plated cylinders, and EZ Pull starting system. This non-clutch curve shaft gas trimmer also includes an adjustable D-handle for easy use. It is backed by a 2-year limited manufacturer's warranty.

Get 7% OFF

Want to read more honest consumer review about Yard Machines 3100M 17 Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer now ?

BOA BO17001 Grabit Screw Extractors Review

Average Reviews:

(More customer reviews)These work great and have saved me hours of work and frustration taking out stripped machine screws and woodscrews in hard wood. They're a bargain.

Click Here to see more reviews about: BOA BO17001 Grabit Screw Extractors

Want to read more honest consumer review about BOA BO17001 Grabit Screw Extractors now ?

Nocord Digital Torque Control Wrench DigiWrench WWT-1430 Review

Average Reviews:

(More customer reviews)Excellent product. I just changed all my wheels (took of winter tires), and this made it easy. The torque control seems to work fine (I'm not sure how I'd actually check that it was correct though.. but it seemed consistent across all the wheels).

One thing I suggest, is get some paper towels, and put them over your wheel nut, before pushing the wrench onto the nut. This will protect your wheel nuts from scratches.
I found when I just used the wrench bare, it left scratches on my wheel nuts due to the force with which it was "hammering" them loose/tight. The paper towel solved the problem. Definitely not a reason not to purchase this.

Click Here to see more reviews about: Nocord Digital Torque Control Wrench DigiWrench WWT-1430

Product Description:
Digital Wrench, with its patented Anti-Clutch system and digital torque control eliminates the hassle of loosening and tightening lug nuts, even those that have been tightened by a mechanic or at the factory. With the help of digital readout screen, control the amount of torque you need up to 250ft/lbs and you can easily tighten or loosen your lug nuts. The DigiWrench, a Digitally Controlled 12 Volt DC DIY Impact Wrench, is the only impact wrench of its kind in the world, allowing you to digitally select your desired amount of torque. This torque wrench has a 1/2" drive 250 Ft-lbs ratio. With 4 socket sizes, you don't have to worry about it being a perfect fit. The sockets themselves are specially designed to compensate for over and under tightening. The patented digital torque control with LED display will allow you to easily adjust the torque settings according to your needs. The Patented clutch system works to prevent backlash and to reduce overall power consumption. And just in case, nut wrench comes with a replacement fuse. This torque control wrench is dark grey in color and comes in blow mold case.

Get 36% OFF

Want to read more honest consumer review about Nocord Digital Torque Control Wrench DigiWrench WWT-1430 now ?

Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold & Blue Anodized) with One Piece colored or white Standard 3/8" School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter Review

Average Reviews:

(More customer reviews)If the chalk breaks, which happens easily against the metal edges, especially in the hands of enthusiastic junior high students doing board races, you have to unscrew the top and use the edge of a paperclip, or other sharp, thin object, to push the chalk up so that it can be used again.This tool is much sturdier than the plastic variety, but doesn't have the button on bottom that you can push for easy chalk release and refill.

Click Here to see more reviews about: Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold and Blue Anodized) with One Piece colored or white Standard 3/8 School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter

Product Description:
SPECIAL OFFER VALUE PACK, Save 5% + Receive free High Lighter. Three Chalk Holders: 1 each of Pro Series Clear, Gold & Blue Anodized Bodies with one pieces of standard colored or white 3/8" Diameter Chalk in each holder. PLUS receive a Free Fluorescent HighLigher. Handle has Non-Slip Finger Grip surface on body and chuck nut for better control when writing and aids in removing or replacing chalk. Hole in top of handle for easy removal of broken chalk. Made In USA. (Des.Pat.No. D416,777) >>> SUGGESTED USES: Helps prevent broken chalk and a convenient way to firmly hold chalk and keep hands free of chalk dust. Makes a great Gift.

Want to read more honest consumer review about Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold and Blue Anodized) with One Piece colored or white Standard 3/8 School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter now ?

Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery) Review

Average Reviews:

(More customer reviews)I bought this Tool about 1 year ago and used it only 10 times. It already broke, I can't change gears anymore.
Now I have to deal with the warranty what is long enough but I would never buy that tool again. I got most of the other LXT series and I am very happy with them. The hammer drill is great. The other impacts drills are great, too. The saws and grinder are great as well.
But don't, don't, don't waste your money for the hybrid drill, you will have a hard time finding all the bits you need for drilling in concrete, the only way is with special adapter chucks and than you are right back with a normal drill.It really doesn't work as good as advertised.
But I give 5 Stars to the rest of the Series LXT. I am a big fan of Makita battery tools.

Click Here to see more reviews about: Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery)

Product Description:
Makita's 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill provides four functions in one tool. The versatile BTP140Z can drive lag bolts, drive screws with clutch settings, drill into concrete, and drill into wood, metal and plastic. It is a four-in-one tool for any professional who requires cordless product with best-in-class engineering.


View largerBTP140Z Features4-FUNCTIONS - Impact Driver, Hammer Drill, Driver and DrillVERSATILITY - Drills concrete/wood/metal and drives screws with clutch settingCOMFORT - Less weight with ergonomic gripPERFORMANCE - LXT Li-Ion batteries charge in 30 minutes, run longer and deliver 2.5X more cyclesBattery and charger not included
Tool SpecificationsHex shank1/4"Impact maximum torque1,240 in.lbs.Impacts per minute0-3,200 IPMNo load speed0-700, 0-2,300 RPMBlows per minute0-27,600 BPMBattery18V LXT Lithium-IonOverall length7-3/8"Net weight3.9 lbs. (w/battery)Makita-Built Motor Engineered for Versatile Power
The BTP140Z features a Makita-built four-pole motor that delivers 1,240 in.lbs. of Max Torque in a compact size. The BTP140Z has 16 clutch settings and two speeds with 0-700 RPM in low and 0-2,300 RPM in high. For drilling into concrete and masonry, the BTP140Z delivers 0-27,600 blows per minute (BPM). In impact mode, the BTP140Z has 0-3,200 impacts per minute for a range of fastening tasks. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power.
Ergonomic Design in a Compact Size
The BTP140Z weighs just 3.9 pounds (with battery, sold separately) with a more compact design at 7-3/8 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue. The BTP140Z is also equipped with a phosphorescent bumper ring for quick location in dark spaces, and a built-in L.E.D. light to illuminate the work surface for more efficient work.
Versatile Design for a Range of Applications
The BTP140Z is an all-in-one tool for any professional who requires cordless product with best-in-class engineering. It is engineered for drilling, driving, and fastening into wood, metal, steel, concrete, and plastic. The BTP140Z is ideal for HVAC, electricians, plumbers, masons, woodworkers, remodelers, and any pro contractor who requires a best-in-class engineered cordless impact-hammer-driver-drill for a range of tasks. The BTP140Z is just another example of Makita's commitment to innovative technology and best in class engineering.
About Makita's 18V LXT Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Optimum Charging System provide several benefits over old battery technology. When compared to traditional 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time.
Makita's 18V Lithium-Ion battery delivers 2,000 cycles--2.5X more than Ni-Cd. In addition, built-in shock absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power. During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also faster: it will charge an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V Compact Lithium-Ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18V LXT and 18V Compact Lithium-Ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing line of LXT cordless tool solutions features a wide range of industrial-quality power tools, including driver-drills, impact drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite radio, rechargeable flashlights, and several different combo kits.
About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
Warranty
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.
What's in the Box
Makita BTP140Z 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (tool only).

Other Makita Lithium-Ion Series More 18V Lithium-Ion Tools from Makita
See the entire 18V Lithium-Ion LineupDriver-DrillsImpact DriversImpact WrenchesBHP454BDF451BDF452BDA350BTD144BTW450BTW251BTL063ConcreteMetalworkingCombo KitsBHR240BCS550BPB180LXT1500 15-Tool KitLXT1200 12-Tool KitLXT902 9-Tool Kit

Get 55% OFF

Want to read more honest consumer review about Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery) now ?

Poulan P4018 18-Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case Review

Average Reviews:

(More customer reviews)I bought this saw for general use around my yard. For the money, its a great saw. I used it all day yesterday and it ran great. The only flaw I found was a cheap pull-cord setup that you need to be careful with. The pullcord housing and fly-wheel is all made of plastic...so I can tell Ill have to replace that at some point. Other than that, the saw runs great, and does a great job. FYI the saw does NOT come ready to go. Make sure you tighten the bar support bolts and add all the fluids. Great saw just to have at the house for occasional use.

Click Here to see more reviews about: Poulan P4018 18 Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case

Product Description:
Wild colors and superb performance system helps tame any cutting task. SuperClean? engine performance system for increased power, longer air filter life and reduced fuel consumption. Features easy starting, 18in. bar length, wide handle spacing and gear-driven automatic chain oiler. 2.5 cu. in. engine. Fully assembled; includes carrying case and cutting chain. U.S.A.

Get 4% OFF

Want to read more honest consumer review about Poulan P4018 18 Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case now ?

Husqvarna 240E 16-Inch 38.2cc 2-Stroke Gas-Powered Chain Saw Review

Average Reviews:

(More customer reviews)I would give the saw an overall B- rating.The positve: It starts fairly easily if starting steps followed properly -- read them, follow them.It is light enough for the average home user. The engine seems pretty solid and I cut 1 cord of wood with the saw (for cutting wood, this saw is too small, but did actually do the task). The negative: the plastic toolless blade adjuster works ok, but seems weak and will break any minute.It worked sorta ok for me, but not great.The oiler didn't work so good after a few hours of use and should be cleaned often.

Overall the saw would be good for a home user that needs to cut 4 inch limbs and the occasional 6-10 tree.Follow instructions for starting and keep the chain well oiled, even if the oiler gets gunked up.

Click Here to see more reviews about: Husqvarna 240E 16 Inch 38.2cc 2-Stroke Gas-Powered Chain Saw

Product Description:
Designed to fit the needs of homeowners and do-it-yourselfers, the Husqvarna 240E Gas-Powered Chainsaw specializes in light cutting and finesse-oriented tasks. Ideal for yard maintenance, tree trimming, and hobby work, this two-horsepower chainsaw features an ergonomic design and cutting-edge technology that help minimize emissions and maximize efficiency.

The Husqvarna 240E Gas-Powered Chainsaw
At a Glance:

Ideal for tree trimming, hobby work, and other medium-duty tasks
2-HP engine uses X-Torq technology to reduce fuel consumption and keep emission levels low
Ergonomic design and low vibration levels help minimize user fatigue
Combined choke/stop control and streamlined fuel system allows for quick, easy startups
Backed by a two-year manufacturer's warranty

LowVib technology reduces vibration and lessens fatigue. View larger.
A centrifugal air cleaning system removes large debris before it reaches the air filter. View larger.Powerful 1.8HP X-Torq Engine Keeps Emissions Low
The 240E delivers 1.8 horsepower, making it well-suited for medium-duty jobs, such as pruning or domestic cutting. The engine features Husqvarna's special X-Torq technology, which reduces emission levels by up to 60 percent and fuel consumption by up to 30 percent, so you'll be able to harness the power of a gas-powered chainsaw without having to worry about heavy pollutant output.
Durable Engine Built for Long Life
The 240E's engine has been built to withstand years of use. It uses a three-piece crankshaft, which has been forged and compressed for superior durability. Also, the chainsaw's centrifugal air cleaning system helps preserve engine life by removing harmful debris before it reaches the filter.
Easy, Effortless Startup
With the 240E, you won't have to waste precious minutes trying to start the engine. The chainsaw uses a combined choke/stop control, which allows for easy engine starting and reduces the risk of flooding. It also has a specially optimized fuel pump, which keeps the fuel lines clear and helps facilitate startup.
Ergonomic Design Reduces User Fatigue
The 240E has a lightweight frame that minimizes strain on your body, even after extended use. The chainsaw's shape, which includes a seven-degree offset handle and contoured body, helps minimize fatigue. The chainsaw also keeps vibrations to a minimum, thanks to Husqvarna's Low-Vib technology, which makes the chainsaw easier on your joints.
The 240E is backed by a two-year manufacturer's warranty.
Husqvarna: Exceptional Products for Exceptional Yards
Great yards demand equipment that is as dedicated and hardworking as you are. Fortunately, Husqvarna's range of garden equipment offers everything from lawnmowers and snow blowers to trimmers and chainsaws that let you master your slice of the great outdoors. With Husqvarna, it's easy to make your yard the envy of the neighborhood.
What's in the Box
Husqvarna 240 E-series Chainsaw.


The Husqvarna 240E Chainsaw was named "Best Buy" by Consumers Digest.

Want to read more honest consumer review about Husqvarna 240E 16 Inch 38.2cc 2-Stroke Gas-Powered Chain Saw now ?

Troy-Bilt TB70SS 17-Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft Review

Average Reviews:

(More customer reviews)I started with the straight-shaft trimmer and soon added the pole saw for lopping off those low hanging limbs.Some pole saws have the motor in the saw and are practically impossible to use because they are so top heavy.The Troy-Bilt motor acts like a counter-balance to lighten the weight of the saw.Now, I've added the brush cutter which cuts tough weeds and grass, but doesn't do much for small tree seedlings more than a half inch in diameter.I've used it two full years for trimming grass, limbs, and weeds (sunflowers) and can usually depend on it starting with 1 or 2 easy pulls.I've had a couple of other string trimmers and hated them because they were hard to start, but the Troy-Bilt (MTD) is very satisfactory.I've recently switched to .105 line and it lasts a long time if you stay away from curbs and foundations.

Click Here to see more reviews about: Troy-Bilt TB70SS 17 Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft

Product Description:
The Troy-Bilt 2-cycle 31 cc clutch gas trimmer features convenient EZ-Start choke technology, which allows the user to simply flip the choke, prime the engine, and then give a slow, smooth, easy pull for a guaranteed start. The EZ-Start technology allows the trimmer's engine to engage with 55-percent less effort than most gas models. With its rugged 31 cc engine, the trimmer provides plenty of brawn to power through the most ragged, overgrown growth. The trimmer's professional-style straight-shaft, split-boom design gives easy access underneath low-growing shrubs. The trimmer cuts in a 17-inch radius and features heavy-duty, 0.095-inch dual lines with convenient bump-head line release.
When it's time to replace the line, the featured SpeedSpool line replacement system is exceptionally easy to load and rewind, all without removing the spool or taking it apart. The entire trimmer feels exceptionally balanced and comfortable in the hand, and the ergonomic soft-grip D-shaped handle easily adjusts for both right and left-handed users. The trimmer's engine and upper handle is compatible with other Troy-Bilt EZ-Link attachments (sold separately), a feature that allows you to turn your trimmer into an edger, cultivator, hedge trimmer, blower, or pole saw. The trimmer comes with all the necessary oil for immediate operation, and is covered by a 2-year limited warranty.

Want to read more honest consumer review about Troy-Bilt TB70SS 17 Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft now ?

DEWALT DW966K-2 14.4-Volt NiCd 3/8-Inch Cordless Right Angle Drill/Driver Kit Review

Average Reviews:

(More customer reviews)Out of necessity and because it has ample power, I had been planning to convert this drill to a 1/2" chuck for some time, but just recently got around to it.
Since the DW960 comes with a 3/8" capacity chuck, I assumed that it would be mounted on a 3/8" X 24 TPI spindle as most 3/8" drills are.
Before buying a 1/2" chuck with a reduced 3/8" X 24 TPI mount, I decided to remove the original chuck and check the spindle to be sure.
With the chuck removed, I found that the DW960 has a 1/2" X 20 TPI spindle, which is the standard spindle size for mounting a 1/2" chuck.
I wouldn't bother changing out the chuck on my older model DW966 14.4V right angle drill because it doesn't really have enough power to make it worth the expense, but I decided to check the spindle size on it anyway. It too has the 1/2" X 20 TPI spindle.
Dewalt most likely does this to give the short spindles more strength, not to allow for an upgrade to a 1/2" chuck. Nevertheless, I really need this drill to be a 1/2", so I purchased a Jacobs made Dewalt OEM style keyless chuck from McMaster and installed it on the drill. It fit perfectly, actually better than the original did, and for my work needs, the extra chuck capacity makes all the difference.
I would never attempt to use this right angle drill as hard as my straight 1/2" cordless drill, but when working in a tight space, it's great to finally be able to use the DW960 with my Greenlee hole saws larger than 7/8", which have 7/16" shanks. This was the main reason for wanting to ditch the standard 3/8" chuck.
I've used it with hole saws up to 3-1/2" in 1X and 2-1/2" in 2X material. This seems to be completely within the drills ability without producing any unusual motor strain or heating. Understandably, I'm sure Dewalt would not approve of this modification and if the motor or gear train does eventually end up as toast, I'm okay with the fact that it will be my fault, not Dewalt's.
With that being said, it now appears that I can finally stop waiting for Dewalt to produce an 18V cordless 1/2" right angle drill.

Click Here to see more reviews about: DEWALT DW966K-2 14.4-Volt NiCd 3/8 Inch Cordless Right Angle Drill/Driver Kit

Product Description:
The DeWalt DW966K-2 14.4-volt Ni-Cad 3/8-inch cordless right angle drill/driver kit features two speed ranges (0-to-400 and 0-to-1,250 RPM) for increased user flexibility on a wide range of applications. This drill/driver is capable of producing 210 unit-watts for heavy-duty applications such as turning large bits and fasteners. Other features include a multi-grip trigger for added comfort and convenience and variable speed with a reverse mode. With a durable, right angle sealed ball bearing transmission for longer tool life, this drill/driver weighs 4.4 pounds and comes with a one-hour charger, two 14.4-volt compact batteries, and a heavy-duty kit box.

Get 41% OFF

Want to read more honest consumer review about DEWALT DW966K-2 14.4-Volt NiCd 3/8 Inch Cordless Right Angle Drill/Driver Kit now ?

Wilmar - 100 Piece Master Bit Set (W1389) Review

Average Reviews:

(More customer reviews)product was shipped quickly and everything looked good untill I used the bits and found several were not true and couldnt be used.Some of the ones with a hole in center for security torx, the hole wasn't in the center so I couldn't use them either.I don't bother a company fussing with them, I'm the consumer that just don't go back to them again.I would not have written a review normally, but Amazon bugged me thru my e-mail to write a review, bottom line is that I do not think very much of the product.

Click Here to see more reviews about: Wilmar - 100 Piece Master Bit Set (W1389)

Product Description:

Use with screwdrivers, electric drills or socket wrenches
Includes: Bit adapters, magnetic bit holder, "Y" style bits, couplers, phillips, Pozidrive, square, slotted, spanner, star, torque, tamper resistant star & hex, tri-wing, metric & SAE hex, clutch head and spine bits

Get 33% OFF

Want to read more honest consumer review about Wilmar - 100 Piece Master Bit Set (W1389) now ?

Troy-Bilt TB20CS 17-Inch 31cc 2-Cycle Gas-Powered Curved Shaft String Trimmer with Detachable Shaft Review

Average Reviews:

(More customer reviews)If you are in the market for an entry level ( $120 or less ) gas powered string trimmer, the Troy Bilt TB20CS has to be at the top of your list.

After much research, I chose this item over all the rest. My reasoning was as follows :

1). The TB20CS receives the most 4 and 5 star ratings of any entry level trimmer, both here as well as other review web sites.

2). It has a 31 CC engine, as opposed to 25 CC engines found on many of the competitive trimmers. That's 22% more power capacity.

3). It uses .095 trimmer cord, which takes a heavier beating than the thinner cord in some of the competition.

4). This baby has a clutch. Some of the competition does not bother with this, I prefer that my cutting line comes to a stop when I feather the throttle back to idle.

5). I like the split shaft that allows me the option to use other tools.

6). Standard dual line bump head spool provides twice the cutting action as some of the single line competitors.

7). It includes the Speedlock fixed line spool for no added charge.

8). Cost : $99.96 at Lowes. Also $99 at Troy.com, but be careful of shipping charges.

A special note to anyone using 2 cycle engine driven tools :

You will note a lot of folk downgrade these items due to either poor starting or poor running characteristics at speed. I suspect these folks have failed to follow one or more guidelines for use of 2 cycle equipment :

A). Follow the manufacturer's recommended procedure for starting. They are the ones most familiar with their product. ALWAYS hold the throttle open 1/4 of the way when using full and half choke.

B). Never use old gas. That stuff you mixed up last year will cause you big trouble this year. My rule of thumb is to replace gas once it gets to be 3 months old ( with or without a gas stabilizer ).

C). Always mix oil and gas to the manufacturers specification. If it calls for 40:1, do not mix 30:1. That will cause starting as well as running problems.

D). When finished with a session, pour the gas from the trimmer back into the gas can. Start the trimmer and run 'er dry.

I used my TB20CS for an hour today with great results. Never ran engine above 50% throttle cutting grass 18 to 24 inches tall. Had to line feed only three times during the hour after hitting something really BIG in the grass. That .095 cord zipped through some heavy twigs as well as cactus without snapping.

My only negative is that my forearm started to ache after that hour. But then again, the TB20CS is not a light weight. A sling may be in order if I plan on extended use.

GO FOR IT !!!!

Click Here to see more reviews about: Troy-Bilt TB20CS 17 Inch 31cc 2-Cycle Gas-Powered Curved Shaft String Trimmer with Detachable Shaft

Product Description:
The Troy-Bilt TB20CS Curved-Shaft Gas String Trimmer makes yard work a breeze thanks to its curved design and powerful engine. Featuring an adjustable D-handle for right- or left-handed use, this trimmer is compatible with all Trimmer Plus attachments, giving you additional edging and trimming options for creating and maintaining an attractive, well-manicured lawn.

The Troy-Bilt TB20CS
Gas String Trimmer
At a Glance:

Powerful 31cc, 2-cycle engine
17-inch cutting swath
Spring Assist feature for easy engine start-up
Lightweight, curved shaft
EZ Link coupler accepts trimmer attachments
2-year limited warranty

Curved design facilitates trimming in hard-to-reach areas.
Powerful and Versatile
With an easy-to-use curved shaft and an EZ Link system that accepts trimmer attachments (sold separately), the TB20CS leaves your yard looking its best. It provides a 17-inch cutting swath and powers through tall grass, bushy weeds, and twigs with its dual 0.095-inch line.
For optimum versatility and durability, the TB20CS comes equipped with both a standard bump head knob and a Speed Lock fixed line trimmer head. To ensure uninterrupted performance, the bump head line releases quickly to smoothly advance the trimmer line.
Incredibly Easy to Use
The TB20CS is incredibly easy to use. Thanks to the Spring Assist feature and a powerful 31cc, two-cycle engine with performance-tuned ignition, the TB20CS starts quickly with just a slow and steady pull--no extra effort required.
For added convenience, the TB20CS comes with oil, so you can get started right away. And if you're a trimming novice, you'll appreciate the clear, step-by-step setup and operating instructions included with the tool.
The TB20CS is backed by a limited two-year warranty.
About Troy-Bilt: Products Built for the Long Haul
Troy-Bilt knows that when it comes to yard care and maintenance, you shouldn't cut corners, and you should always use the right tool for the job. That's why for over 60 years, Troy-Bilt has made top-quality tillers, mowers, tractors, and yard tools that are built to last, for a lifetime of lawn and garden care.
What's in the Box
Trimmer; standard bump head knob; SpeedLock fixed line trimmer head; oil; and manual.

Want to read more honest consumer review about Troy-Bilt TB20CS 17 Inch 31cc 2-Cycle Gas-Powered Curved Shaft String Trimmer with Detachable Shaft now ?