4/30/2011

Weed Eater WE-ONE 26-Inch 190cc Briggs & Stratton 875 Series Gas Powered Riding Lawn Mower With Electric Start Review

Weed Eater WE-ONE 26 inch 190cc Briggs & Stratton 875 Series Gas Powered Riding Lawn Mower With Electric Start
Average Reviews:

(More customer reviews)
With this being a new item this year, early availability has been low.Found that one of the Big Box retailers had received one or two each and thought I'd snag one quick as they could be in short supply.Going on faith, as no reviews to be found yet, I brought one home still crated.Was very pleased with quality at first sight, found it to be very simple to assemble and it started right up with just some fuel...oil already installed.I had read about the new Briggs 875 engine and although no HP rating, the 8.75 torqe rating was listed.The engine is very quiet with a nice muffler system and it moves the mower over grass very well.Engaging the mower deck (belt driven so do so slowly, the noise level increases while turning the drive pulleys and the blade and the enging revs with the increased load.As it is only mid March, I haven't cut grass with it yet, but I expect it will do so nicely.There are 3 forward speeds and I am hopeful that it will cut well at the fastest because the lower two are a bit slow for long stretches, but nice for going against walkways, etc.There are only four cutting heights available with the middle two being approximately 2 1/4 and 3 1/4 high.I expect that I may wish it had another height in between these, say about 2 3/4, as the highest and lowest will probably not be useful for me.While the ergonomics seem fine so far, the seat appears to have cushioned sections but they are no softer than the rest of it.Given the low price, I can't really quibble with that and I will likely use a stadium seat pad if uncomfortable as is.Controls seem convenient and sightlines for cutting are good.26" cut is relatively small, but hopefully will be made up for by speed and less walking.The specs say that the blade is designed for mulching and bagging, but the accessories (mulch kit or bag) are not yet available but the mulch kit is expected to be soon.The turning circle is not tight, as I expected for this type of unit, so a few perimeter runs will likely be needed to gain area for turning for the mid-lawn runs.My property is only 120' square, but significantly larger lots may demand a wider cut and more features.Having said that, this unit is fairly small, of low complexity (one blade) and if it cuts well should meet the needs of many homeowners.It is not a tractor, so towing attachments doesn't appear to be an option, but that allows for a smaller motor and footprint in the garage.Lastly, I like that it is in cruise control when moving, no foot on the gas, only the brake/clutch when needed (it actually has a brake pad and rotor).I will review grass cutting later in the Spring.

Click Here to see more reviews about: Weed Eater WE-ONE 26 Inch 190cc Briggs and Stratton 875 Series Gas Powered Riding Lawn Mower With Electric Start

Product Description:
The new Weed Eater One redefines affordability for easy lawn maintenance. Designed from the ground up for YOU, it is the first compact personal riding mower on the market. Every aspect of the design process took into consideration your feedback on what consumers want in a riding mower. The Weed Eater One boasts a powerful Briggs & Stratton engine, a solid 26-inch cutting deck that delivers a precise, even cut and plenty of comfort features for a smooth and enjoyable ride. It's simply the ONE. The Weed Eater One is fully electric start, all you have to do is turn the key. A simple control on the left allows the operator to adjust the cutting height from approximately 1.5 to 4 inches. Features three drive speeds; speed one is for edging, speed two is for regular grass cutting, and three is for faster transport. Release your foot while in any of the three forward gears and you will be in cruise control for a relaxed cut. Spans approximately 36 inches wide, allowing it to easily fit through a standard yard gate, just lift up the deck chute handle. The Weed Eater One stores flatter against the wall in a garage and with its ability to maneuver in tight spaces, it reduces the need to touch up areas with a push mower or string trimmer, saving you time and money on quality results. An intuitive and easy to use pedal allows the operator to control the brake and clutch with one foot. Pressing down applies the brake, while lifting engages the clutch to propel forward. The 26 inch cutting deck is made of 13 gauge steel and can handle all the bumps and bruises without denting. The deeper deck combined with an efficient single blade design allows for superior airflow resulting in a more uniform cut quality and reduced chance of scalping in uneven terrain. Features a wide step-through frame with incorporated non-slip foot rests so you can mount and dismount safely from either side.

Buy NowGet 13% OFF

Want to read more honest consumer review about Weed Eater WE-ONE 26 Inch 190cc Briggs and Stratton 875 Series Gas Powered Riding Lawn Mower With Electric Start now ?

4/28/2011

Weed Eater PE550 8.1/2-Inch 22cc 2-Cycle Gas-Powered Poweredge Lawn Edger Review

Weed Eater PE550 8.1/2 inch 22cc 2-Cycle Gas-Powered Poweredge Lawn Edger
Average Reviews:

(More customer reviews)
I purchased this edger at my local Home Depot,used it and returned it that day. It simply does not have the power to edge.The blade stops rotating when the engine is under load. Do yourself afavor and spend a little moreto get a low end McLane model, you will be glad you did

Click Here to see more reviews about: Weed Eater PE550 8.1/2 Inch 22cc 2-Cycle Gas-Powered Poweredge Lawn Edger

Product Description:
Gear-driven for more torque than belt-drive units. Tempered steel blade adjusts to 1" and 2" cutting depths. Anti-vibration T-handle for control and comfort. Blade retracts when handle is released. Heavy duty automatic clutch.

SPECIFICATIONS: 22cc 2 cycle engine, 3 wheels, 2" cutting depth, weighs 14.9 pounds.

Buy Now

Want to read more honest consumer review about Weed Eater PE550 8.1/2 Inch 22cc 2-Cycle Gas-Powered Poweredge Lawn Edger now ?

4/26/2011

OEM 25036 Bleed-O-Matic One-Man Brake Bleeder Kit Review

OEM 25036 Bleed-O-Matic One-Man Brake Bleeder Kit
Average Reviews:

(More customer reviews)
Needed to bleed my brakes without help from an "assistant" so I bought one of these at Autozone for $7. To say that this product is CHEAPLY CONSTRUCTED would be an understatement. It's made in China and I would be surprised if the kit parts cost more than the packaging !
It has a few problems:
1. The bottle must be positioned higher than the brake cylinder to allow air bubbles to rise and go into the bottle. To do this, there's a magnetic disk on the back of the bottle that you're supposed to place on the frame of the car. The magnet is not very strong, and when the bottle fills with brake fluid, the magnet will likely let go and then the bottle falls on the ground, spills brake fluid, etc. Big mess ! If the frame is rusty, forget it !
2. After you bleed the brake and close the bleed valve you remove the tube and tapered fitting from the valve. If you don't pay close attention, you will VERY LIKELY have brake fluid running out of the bottle and all over your hands, clothing and the ground.

Good things about the product:(1) It DOES do what it claims. (2) It's dirt cheap. (3) It comes with a lifetime warranty from OEM Tools.

Click Here to see more reviews about: OEM 25036 Bleed-O-Matic One-Man Brake Bleeder Kit



Buy Now

Want to read more honest consumer review about OEM 25036 Bleed-O-Matic One-Man Brake Bleeder Kit now ?

4/24/2011

Superwinch 09034 EPi9.0 Series Master Winch Review

Superwinch 09034 EPi9.0 Series Master Winch
Average Reviews:

(More customer reviews)
I've been very pleased with this winch after a difficult installation... At one point I used this to drag the bottom out from under a 60ft poplar tree that wedged into the ground and hung up on another tree after I cut it. I know from the past that a come-along or even dragging with chains wouldn't have budged it. Speed is also faster than most.

HOWEVER, the bolts I received with the winch (1/2in) would not even fit through the mount holes! I went and bought 4, 7/16in grade 8 bolts and the nuts fit in the right side of the winch but not the left(?!) 3/8 was too small so I had to grind down 3 edges on the head of 2 of my 7/16 nuts to get this to mount, a royal pain! Great product though so I guess it's worth the trouble.

Also, I'd recommend going to a steel wholesaler and getting 1/2in plate steel to drill and mount to, save a LOT of money off the retail plate. Go to myspaceDOTcom/jbtvt and click pics to see the process I used.

Click Here to see more reviews about: Superwinch 09034 EPi9.0 Series Master Winch

Product Description:
The Superwinch EPi9.0 Series Master Winch is designed to be compact, dependable and suitable for 4x4s and similar vehicles as well as workshops, trailers and jobs around the house. Utilizing 100 feet of ultra-durable wire winch rope and a high-efficiency 4.6 hp motor featuring a 9,000 lb pull rating, a full metal three-stage planetary gear train, a lift and turn freespooling clutch, wired remote operation and a limited lifetime warranty, it is an ideal winching choice for both serious recreation and heavy duty work situations alike.
High Efficiency and Power and Performance
The Superwinch EPi9.0 Series Master Winch is designed to provide both power and performance for 4x4s and other heavy vehicles through its blend of high efficiency drawing power and additional top-of-the-line features. Its efficient 4.6 hp series wound motor easily attaches to, and is powered by, your primary car battery or an auxiliary installed battery (recommended in cases of heavy winch use). The motor features a 9,000 lb line pull rating, both load in and load out drum rotation for mechanized movement of winch rope, a full metal 3-stage planetary gear box and an accessible lift and turn freespooling clutch allowing users to quickly disengage the motor and manually draw out as much winch rope as needed, at any time.



Powerful, efficient and safe.
View larger.

Buy NowGet 47% OFF

Want to read more honest consumer review about Superwinch 09034 EPi9.0 Series Master Winch now ?

4/22/2011

Milwaukee 1680-21 13 amp 1/2-inch Super Hawg Joist and Stud Drill Review

Milwaukee 1680-21 13 amp 1/2-inch Super Hawg Joist and Stud Drill
Average Reviews:

(More customer reviews)
This is an improved version of the Hole-Hawg.This new tool has more power, easier to use, and fits into tight spaces better.I depend on Milwaukee tools for my livelihood and they delivered a great new tool with this one.

Click Here to see more reviews about: Milwaukee 1680-21 13 amp 1/2-inch Super Hawg Joist and Stud Drill

Product Description:
Powerful 13 Amp Milwaukee built motor. Perfect for drilling holes of all sizes in wood frame construction. Low speed clutch. Fast drilling with 1750 RPM high; 450 RPM low. 3-position Roto-Lokrear handle with 90degleft-right rotation. Includes side handle, 8ft. 3-wire fixed rubber cord, and impact-resistant carrying case. U.S.A. Amps: 13, Chuck Size (in.): 1/2, Speed (RPM): 450 and 1750, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes

Buy NowGet 46% OFF

Want to read more honest consumer review about Milwaukee 1680-21 13 amp 1/2-inch Super Hawg Joist and Stud Drill now ?

4/20/2011

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver Review

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver
Average Reviews:

(More customer reviews)
I've been thinking about a cordless impact driver since they first hit the market a few years ago, but it was hard to justify when I have a Bosch 24 volt drill that will drive anything.Recently, however, I was driving lag screws in the confined space of a 105 degree attic as I was sistering new ceiling joists to the old ones.My wrist was about to fall off after the first joist.I borrowed a pneumatic impact driver from a friend, and it made the all the difference and convinced me that a cordless impact driver was a must.Turning to my favorite resource for tools, Amazon, I saw a killer deal on this Panasonic driver in combo with a drill and ordered it.It seems that the combo is not available now, but check Panasonic's website for rebates..they sometimes offer the drill body as a free promotion when you buy the impact driver.

Anyway, I love these tools!Like I said, my Bosch has the torque to drive anything, but it weighs a ton and so can be very difficult to handle unless you're working right in front of you...especially if you need to lean into it to driver a fastener without stripping the head.Not so with the Panasonic. It's very light and compact, and you only need to apply enough force to keep the bit in/on the fastener... the impact driver does the work of driving it.Some reviewers of other impact drivers have mentioned breaking off screw heads with their drivers, but the electronic clutch on this tool really works.You can set 11 (I think it's 11--don't have the tool in front of me) different torque levels, 3 different impact settings (soft, medium, hard), and there is a "one shot" feature that does just one impact when you pull the trigger and then it stops---great for snugging up a fastener. Once you've set the clutch, you pull the trigger and it spins until a little resistance is encountered, then the impact hammer goes to work, and finally the driver stops when it's reached the torque level you've set. If you're not happy with how the fastener is seated, it's easy to fine tune simply by feathering the trigger--it's very responsive.My only (very minor)complaint is that it's a little hard to make the bit turn slowly when you first pull the trigger, but I'm getting a better feel for it.

Contrary to what some reviewers think of them on other drivers, the LED light is useful.It's situated so it flashes on the fastener you're driving, and it's activated by the trigger.If you barely pull the trigger, it'll activate the light without turning the driver.Sure, 97% of the time I don't need the light, but for that 3% of the time that I'm hunched down in a cabinet or a crawlspace trying to drive a screw, why not??!! The belt hook is great feature too.

Since I got the combo, I have to say that I love the drill as well.I did some head-to-head comparisons with my Bosch boring holes, and while the Bosch ultimately wins in the torque department, the Panasonic is a close second.Considering the weight advantage, I'm going to sell my Bosch and I'll pull out a corded drill in the rare case that the Panasonic can't make the hole.The Panasonic's keyless chuck is different and superior to any others I've used.

I'm not aware of any other manufacturer offering a 3.5Ah NIMH battery, so that's another plus.Panasonic makes batteries for many other companies, so they know how it's done.I saw a review of another Panasonic impact driver that complained about the durability of the tool, but that's hard to imagine.These tools feel solid and built to last.Of course, time will tell, and I'll certainly post an update to this review should I encounter any troubles.

Click Here to see more reviews about: Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver

Product Description:
With this nifty little tool, you may never use a regular drill to drive screws again. The digital settings are easy to adjust, and an onboard microcomputer senses pressure to prevent you from overdriving and damaging the surface of whatever you are working on. The LED light is a nice touch in low light conditions. It is extremely light weight, but packs enough power to satisfy professionals as well as do-it-yourselfers. The driver won't bog down when pushed to it's limits, it just keeps plugging away, trying to further seat the fastener. Panasonic is a leader in the battery industry and the long battery life of the 3.5 amp packs on this tool are another plus. All in all, this is a super tool - extremely versatile, lightweight, great batteries and charger.--Jodi Johnson

Buy NowGet 33% OFF

Want to read more honest consumer review about Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver now ?

4/18/2011

Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit Review

Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit
Average Reviews:

(More customer reviews)
I debated getting this screwdriver for a very long time due to its cost after seeing its predecessor in a store and liking the feel of it as it is one of those tools that makes you say "Ooh, well made tool!" when first picked up. Now after having it for a couple years, I wouldn't be without it as I didn't realize how much time I was wasting with a manual screwdriver. I use it primarily for computer repair (torque control clutch is great) and IT infrastructure work - rack and wall plate screws, cable management duct mounting, workstation table assembly, etc. It excels at its intended application with machine screws and shorter self-tapping or pre-drilled wood screws, but it is not a construction driver with high torque. The batteries are fast charging and the case is one of the best designed tool cases I've encountered with storage for extra batteries and driving accessories such as long bits, extensions, chuck, and screws. The only nitpick I have is that the LED light is yellowish and embarrassingly dim compared to my Fenix E01 LED keychain light given the cost of the screwdriver. Still, this is a great tool.

Click Here to see more reviews about: Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit

Product Description:
Chuck: 1/4" Hex quick connect. Reversible: Yes. Ergonomics: Ergonomic design to reduce fatigue. Acceptable Battery Packs: Panasonic 3.6V Lithium-Ion Batteries. LED Work Light: Yes. Tool Length: 10-55/64" straight. Tool Weight: 1.1 lbs.

Buy NowGet 42% OFF

Want to read more honest consumer review about Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit now ?

4/16/2011

Vermont American 15511 All Purpose Multi-Bit Magnetic Hand Driver Set Review

Vermont American 15511 All Purpose Multi-Bit Magnetic Hand Driver Set
Average Reviews:

(More customer reviews)
Vermont American's products are high quality and reasonably priced.This screwdriver is solidly built and will certainly outlast the cheap Chinese-made junk.

Click Here to see more reviews about: Vermont American 15511 All Purpose Multi-Bit Magnetic Hand Driver Set

Product Description:
Vermont American 15511 Hand Driver SetsVermont American 15511 Hand Driver Sets Features:; Use one screwdriver for many jobs with these hand driver sets. The high-impact acetate handle features a comfortable grip and compartment for bit storage.; 15493 is a 7 piece RV and mobile home magnetic screwdriver set containing the following: Square recess #1 and #2, 5/32" clutch, Phillips #2 and 6-8 slotted insert bits with hand driver; 15496 is a 4-in-1 multi-bit screwdriver set that includes Phillips #1 / 6-8 slotted and Phillips #2 / 3-4 slotted double-ended bits; 15511 is a magnetic screwdriver set for Torx type screws that contains insert bits TX10, TX15, TX20, TX25 and TX30; 15518 is an 11" all-purpose multi-bit magentic screwdriver set that includes hand driver with 3-4 and 6-8 slotted and Phillips #1 and #2 insert bits; All purpose multi-bit magnetic screwdriver set

Buy NowGet 38% OFF

Want to read more honest consumer review about Vermont American 15511 All Purpose Multi-Bit Magnetic Hand Driver Set now ?

4/14/2011

Bare-Tool DEWALT DC988B Heavy Duty XRPTM 1/2-inch 18-Volt Cordless Hammerdrill/Drill/Driver (Tool Only, No Battery) Review

Bare-Tool DEWALT DC988B Heavy Duty XRPTM 1/2-inch 18-Volt Cordless Hammerdrill/Drill/Driver
Average Reviews:

(More customer reviews)
I was sent a cheaper model than what was advertised and seller was not sure he could send the right one. It appeared my only option was returning for a refund. As I did not feel like going through the hassle of returning for a refund and shopping again for the correct one, I decided to just keep what they sent me. Very dissappointing....

Click Here to see more reviews about: Bare-Tool DEWALT DC988B Heavy Duty XRPTM 1/2-inch 18-Volt Cordless Hammerdrill/Drill/Driver (Tool Only, No Battery)

Product Description:
The DC988 18 Volt XRP 1/2-inch drill/driver/hammerdrill uses a DeWalt built high-torque, high efficiency motor to deliver 500 in./lbs. of torque for drilling large diameter holes and driving large screws. This XRP drill comes equipped with a patented 3-sp

Buy Now

Want to read more honest consumer review about Bare-Tool DEWALT DC988B Heavy Duty XRPTM 1/2-inch 18-Volt Cordless Hammerdrill/Drill/Driver (Tool Only, No Battery) now ?

4/12/2011

Factory Reconditioned Poulan P3314 or P3314WS 14-Inch 33cc 2-Stroke Gas-Powered Chain Saw Review

Factory Reconditioned Poulan P3314 or P3314WS 14 inch 33cc 2-Stroke Gas-Powered Chain Saw
Average Reviews:

(More customer reviews)
This is the perfect chain saw for the homeowner who has small (<12" diameter)trees to cut down, or wants to easily remove medium sized limbs for pruning landscaping purposes.

It starts everytime.You will have to pull the cord a few times, but it always starts.The small size makes it perfect for small jobs around the house.I had 20+ scrub trees obstructing my bluff veiws, and this saw made short work of them.

I'm very happy with my saw.Less than $100 spent and it vastly decreases my work time on the weekends.

Click Here to see more reviews about: Factory Reconditioned Poulan P3314 or P3314WS 14 Inch 33cc 2-Stroke Gas-Powered Chain Saw



Buy Now

Want to read more honest consumer review about Factory Reconditioned Poulan P3314 or P3314WS 14 Inch 33cc 2-Stroke Gas-Powered Chain Saw now ?

4/10/2011

Milwaukee 6742-20 6.5 Amp Drywall Screwdriver Review

Milwaukee 6742-20 6.5 Amp Drywall Screwdriver
Average Reviews:

(More customer reviews)
This is a plain, bare bones screw gun for drywall installation.

It has a soft start feature that helps the motor last longer since some people rather pull the trigger for every screw they shoot.
People who do tons of drywall just lock the trigger and keep driving one screw after the other.

It's designed to shoot screws in all day. Nothing fancy, no clutch, just a depth stop.

I actually use my clutched cordless drill for most drilling and general screwing. I only break this out for drywall. It has the advantage of being lighter weight with pretty decent balance.

If you're going to screw into something that's maybe questionable in strength might benefit from a clutched drill or a clutched screw gun or just going slow with this. These screw guns are really fast and since they're foremost intent is screwing into wood or steel studs having that type of adjustability really isn't required.

This is about the least expensive, no frills way to go for a screwgun and a brand that's been making these for a very long time. It's a good dedicated drywall screw gun.

For decks I might use a clutched gun or just one of the slower rpm screw guns that are geared for more torque to drive longer, fatter screws.

Click Here to see more reviews about: Milwaukee 6742-20 6.5 Amp Drywall Screwdriver

Product Description:
USA Cordless: No, Volts: 120, Rated RPM: 0 - 4,000, Amps: 6.5, Variable Speed: Yes, Belt Clip Included: Yes

Buy NowGet 49% OFF

Want to read more honest consumer review about Milwaukee 6742-20 6.5 Amp Drywall Screwdriver now ?

4/08/2011

McLane Gas Edger/Trimmer (801-3.5RP-CA) Review

McLane Gas Edger/Trimmer
Average Reviews:

(More customer reviews)
I have had my McLane edger since 1974.The new ones are built virtually the same as mine with the exception of different wheels.I have had no problems with mine at all.If you take care of things, they will take care of you.I have used this edger just about every Saturday since 1974 and it performs great.I have seen no engineering problems like the previous poster said.Maybe his was assembled incorrectly. Very dependable edger and it will probably last me the rest of my life.

Click Here to see more reviews about: McLane Gas Edger/Trimmer (801-3.5RP-CA)

Product Description:
Sold as one unit. (1 unit = each.) 3.5 hp Briggs & Stratton. Single lever blade clutch & depth control system. 4 wheel chassis with 1/4" steel frame. Wheels- 8" ball bearings. Variable speed throttle control. Cutterhead 5/8" dia. shaft with solid steel flanged pulley. 2' x 9" blade. Debris sweep deflector. Enclosed belt pulley deflector. Replacement blade(SKU #70230). Boxed. Manufacturer number: 801-3.5RP-CA. SKU #: 70227. Country of origin: (TBA). Distributed by McLane Mfg,, Inc.

Buy Now

Want to read more honest consumer review about McLane Gas Edger/Trimmer (801-3.5RP-CA) now ?

4/06/2011

Poulan Pro PP4620AVX 20-Inch 46cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case Review

Poulan Pro PP4620AVX 20 inch 46cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case
Average Reviews:

(More customer reviews)
I have never written a review before but after using this piece of junk I felt compelled to do so. I own a smaller Poulan saw and liked it enough to buy the bigger one. The 46cc starts and runs great, no problem with the engine at all. It's the chain tensioning device that makes this saw really frustrating to use. Someone decided to "improve" the time tested method of tightening the chain by turning a screw, to this new plastic adjustment dial thing that you don't need tools for. It doesn't work! The adjustment never holds and I have to retighten the chain about every 15 minutes! I thought it was because the chain was new and needed to stretch but I have been using it for sometime now and the problem is getting worse. On more than one occasion this device has allowed the chain to come off during operation, a dangerous and anoying situation that caused damage to the chain and the saw housing. I spend more time fixing this saw than using it. I was a big fan but now I will not buy another Poulon. I wish they would have stuck with the old design which worked just fine and this would be a great saw. I guess Poulon never heard the old saying "if it ain't broke don't fix it".

Click Here to see more reviews about: Poulan Pro PP4620AVX 20 Inch 46cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case

Product Description:
Heavy-duty chain saw can tackle the big jobs. 2.8 cu. in. DuraChromeextended life engine has Super Cleanair filter system, dual counterweight crankshaft. Features 20in. long bar, gear-driven automatic chain oiler, quick-adjust chain tensioning system, anti-vibe handle. Includes carrying case. U.S.A. Chain Saw Type: Gas, Bar Length (in.): 20, Cylinder Displacement (cc): 46, Oil Pump Flow: Automatic, Low Vibration Handle: Yes, Tool-Less Chain Tensioning: Yes, Case Included: Yes

Buy Now

Want to read more honest consumer review about Poulan Pro PP4620AVX 20 Inch 46cc 2-Cycle Gas-Powered Anti-Vibration Chain Saw with Case now ?

4/04/2011

Poulan Pro PP125 17-Inch 25cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Split Shaft Review

Poulan Pro PP125 17 inch 25cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Split Shaft
Average Reviews:

(More customer reviews)
Bought this item about 10 days ago,(Poulan Pro 17-Inch 25cc Gas Powered String Trimmer #PP125), after I've sent another weedeater back that was hard to start.The first weedeater I bought was a curved shaft and it was very hard to start and keep running.So I was a little hesitant to purchase another one from amazon.Once I opened the box all I had to do was attach the 2 pieces together and also attach the safety guard.It took about 3 minutes to put together.Also if buying the attachments, you will be able to switch them with no problem.Also if you take your hand off the throttle, the weedeater will stop, and the engine will still be running (nice safety feature), and when you put your finger back on the throttle, the weedeater will be ready to start trimming again.I actually bought mine for $99.00 shipped when Amazon had their weekend sale.I think this is a really good weedeater at $150.00, but at $99.00 it's even better.

Click Here to see more reviews about: Poulan Pro PP125 17 Inch 25cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Split Shaft

Product Description:
Optional attachments and a split boom shaft turn the Poulan Pro 25 cc 2-cycle gas trimmer into 6-tools-in-1: trimmer, edger, blower, cultivator, brush cutter, or pole pruner. The straight shaft trimmer features a 17-inch cutting width and dual exit .096-inch diameter cutting line. This tool also includes a durachrome cylinder for extended engine life, heavy duty automatic clutch, Tap N Go dual line cutting head, and an effortless Sure Fire pull starting system that eliminates complications with the choke. It is backed by a 2-year limited manufacturer's warranty.
What's in the Box
Poulan 25 cc gas trimmer

Buy NowGet 5% OFF

Want to read more honest consumer review about Poulan Pro PP125 17 Inch 25cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Split Shaft now ?

4/02/2011

Milwaukee 6547-22 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries Review

Milwaukee 6547-22 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries
Average Reviews:

(More customer reviews)
This cordless screwdirver does not compare to any other that I have ever seen or used.I own one with two batteries and used it every day for 4 years for my job repairing computers.It never broke and always had enough power.The clutch is great for precisely limiting the amount of powerneeded for sensative equipment.It is convienient to hold and to carry. The removeable batteries allow for continous operation.Each batterylasted me about a week or two.It is well worth the cost.Othercordless screwdrivers do not even come close in quality.

Click Here to see more reviews about: Milwaukee 6547-22 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries



Buy NowGet 50% OFF

Want to read more honest consumer review about Milwaukee 6547-22 2.4-Volt Two Speed Cordless Screwdriver Kit With Two Batteries now ?